Whether you decide to tile the walls, floor, or shower, you’ll be increasing the value of your property. It might be time consuming and cumbersome to hire someone to handle this work. You can tile your own bathroom in less time than you might imagine if you just follow a few simple steps and muster up some confidence. However, how long does it typically take to tile a bathroom? We combed through a plethora of resources to find the solution to this mystery for you.
Tiling a bathroom is an excellent weekend activity. A professional tile installer will need only approximately 6 to 8 hours to finish tiling a bathroom, whereas a do-it-yourselfer may expect to spend between 11 and 16 hours on the project. The time it takes to tile your bathroom may depend on a number of different things, such as:
- DIY vs. hiring a pro
- Preparation
- Prerequisites: Appropriate Equipment
- Details of the room’s proportions and layout
- Sizes of Tiles
There are many things to think about before choosing when to tile your bathroom, and you will likely have many questions that can help you prepare for the project. Will a day be enough time to tile a bathroom? When it comes to bathroom tiling, how much should you expect to spend? When tiling and grouting, is one day enough? We’ll cover everything you’ve asked for, plus some relevant material. Do not stop reading now.
The length of time it takes to tile a bathroom depends on a number of different things.
DIY vs. hiring a pro
Hiring a professional to tile your bathroom is the quickest and easiest (though more expensive) option to get the job done. You may hire a professional to tile your bathroom in as little as 4 to 8 hours. It will cost you money to hire an expert. Your tiling work suddenly become a lot more expensive, from €11 to €21 per square foot.
Though it might be faster to hire a professional, doing the work yourself will save you money. No prior experience with DIY house repairs is required. If you know how to use several common tools and have a free weekend, you can save yourself more than fifty percent compared to hiring an expert. From 11-16 hours are needed to finish the task.
Preparation
Time is saved in the long run if you take the time up front to make sure the finished product can endure the test of time (and foot traffic and rain) without deteriorating. A clean surface is the first step in getting ready to tile. Clean up the area you’ll be tiling and the surrounding area so that the adhesives hold and the tiles don’t shift or break.
Floors
Make sure the floor is completely flat and level before you start tiling it. Fill up low places and fissures with smooth cement. Thin-set mortar needs to sit for about 11 minutes after mixing and before spreading so that it can absorb all of the water and avoid lumps.
Walls
The wall surface must be flat, uniform, and watertight prior to tiling. If you want your tiles to be as watertight and as smooth as possible, you should put tile backer board over the shower floor and as a base for your tiles. To further ensure the safety of your shower’s walls, you should use waterproof tile adhesive.
Adequate Equipment
It takes time to get to and from the home improvement store. If you measure a room and think that’s accurate, measure it again. Make sure your dimensions are accurate before you go shopping for supplies so you don’t have to run back for more.
The standard rule of thumb is to buy 11 percent more tiles than you think you’ll need. Cutting tiles faster with a diamond blade saw. For cutting tile into precise angles and smaller pieces, tile nippers can be a useful tool. To tile a bathroom, you will need the following materials:
- Tile
- Tile separators
- Set mortar thinly
- Tool for cutting tiles
- tile cutter in wet conditions
- Grout
- Sealant
- Sticky tape measure
- Drawing a Line in the Sand
- Trowel with notches
- Bucket
- There is no sinking grout
- Sponge
Additional materials that could be useful while tiling a wall include:
- Revolving saw blade
- Jigsaw
- Drill
- Board of support
- Wood screws for backing board
Dimensions and Plan
A small bathroom may be tiled in a few hours, whereas a bigger one could take days. It can take more time if you need to cut tiles to fit around pipes, corners, or angles. Tiles can be spaced more efficiently with the use of a gauge stick. During a dry run, the tile location can be marked on a wooden stick to use as a gauge stick later on.
Dimensions of Ceramic Tiles
Medium-sized tiles are the most practical choice for smaller bathrooms because installing enormous tiles can give the illusion that the room is much smaller than it actually is. While decorative accents are a great way to give your floor or walls a little something extra, they can also extend the duration of your job. Cutting irregularly shaped tile, for example to fit around windows, pipes, or fixtures like towel bars and sinks, can be a time-consuming endeavour.
It’s a good idea to remove the baseboards from your space. If the baseboards are not installed, precise cuts are unnecessary and the final result will have a more polished aspect.
Is a day enough time to tile a bathroom?
Despite the fact that it may take only a few hours to actually lay the tile using thin-set mortar in a bathroom, the thin-set must dry overnight before the grout can be put. Time can be saved on the day of tiling if a few preliminary tasks are completed the day before.
The first step is to obtain the necessary supplies. Snap chalk lines from the room’s centre after using a measuring tape. Find the room’s centre, and then use a chalk line to practise laying out your tiles and spacers before committing to the real thing.
On the day you intend to lay the tile, you can mix up the thin-set mortar and apply it to the floor or the back of the tile. Tiles and thin-set mortar should dry overnight after being cut with a wet tile cutter and adhered to the surface.
The following day is ideal for applying grout. Don’t step on it for at least three days so it can cure properly. Because of this, you won’t have to redo the work because of damaged or displaced tiles, saving you both time and money. The grout should be completely dry before being sealed, which should be done 48-72 hours after application.
Is One Day Enough to Tile and Grout?
To ensure that the thin-set mortar dries properly, it is best to lay the tile with it the day before the grout is spread. Tile movement can occur if thin-set is not allowed to dry completely. Fixing this will be an investment of both time and money. You may increase the longevity and success of your project by taking your time between laying the tiles and applying the grout.
What Is a Reasonable Price Range for Bathroom Tiling?
The typical cost of tiling a standard-sized bathroom is reported to be between €1,111 and €3,111 (or between €8 and €18 per square foot) by industry experts. As a matter of course, price will vary depending on a number of aspects.
The most money can be saved by not employing a professional to handle the job, as we described before. The price will also be greatly affected by the materials used. The cost of the tile itself might vary widely, depending on the material and design you select for your bathroom.
Consumming Remarks
DIY bathroom tiling is a great way to save money—hundreds if not thousands—but it may take a lot of time—a whole weekend. Changing the style of your bathroom with tile can seem like an insurmountable effort, but with little preparation and study, you can do it yourself.
