Irrespective of your line of work, mistakes are most likely to happen. However, it is not at all a good idea to ignore the faults. Instead, you should have a close check on these to avoid in the future.
Similarly, in diamond drilling, you need to acquaint yourself with the most common mistakes that happen while drilling. Knowing this beforehand will help you stay prepared and avoid these mistakes.
This comprehensive guide will focus on informing you about these faults. So, keep reading this blog post from the start to the end to clear all your concerns.
Most Common Diamond Drilling Mistakes To Avoid
Diamond core drill bits are typically employed for drilling masonry materials and stone. Contractors, builders and other industrial workers utilise these tools to make the drilling process more efficient and smoother.
But, if you are a beginner, you have a high chance of making mistakes while operating these instruments or tools. Now, let’s have a quick look at what these are in the following section:
Mistake No.1# Not Assessing The Distinct Forms Of Drill Bits
Diamond core drill bits are specialised tools for drilling holes in various materials. It includes masonry blocks, brick, asphalt, concrete and other stone materials. Special drill bits are available in the market for drilling these specific materials.
However, one should always utilise a standard drill bit on stone material as it could damage your equipment. Also, by doing so, you are exposing yourself to the risk of serious injuries. It would help if you chose these diamond core bits to ensure that your work is accomplished smoothly and without any troubles.
Mistake No.2# Neglecting The Importance Of Measuring First
Measuring the length of the holes you need and their positions is a good idea before you start the drilling operation. You must measure first to avoid making a big mistake. Doing a proper measurement at least twice before you cut is always recommended.
If you move ahead without taking appropriate measures, then you are at a higher risk of damaging the material to cut. So, it becomes crucial for you to ascertain the best drill bit size required for attaining the length and depth of the hole to be drilled.
In this way, you can prevent this issue. Not only that, but you will also end up saving your hard-earned money and precious time.
Mistake No.3# Causing Overheating Of The Drill Bit
When you expose a stone surface to the drilling procedure with a diamond core drill bit, it produces an intense amount of heat. It could lead to overheating of your drill in no time.
So, you will be required to stop your work to allow it to cool down. Pausing the operation can again significantly impact your workflow, resulting in a decrease in efficiency. However, there are some great ways to prevent this issue successfully.
By utilising temperature control, you could delay or reduce the overheating procedure. Wet drilling and the use of lubricants also help in lowering the produced heat. Along with that, it also helps in reducing the debris and dust that is built from drilling. And thereby, it aids in promoting healthy working conditions.
Mistake No.4# Not Making Yourself Well-Conversant With Troubleshooting
Are you something who lacks much experience utilising a diamond drill bit? If this is the case, you should familiarise yourself with the most common troubleshooting problems with diamond drilling.
By doing so, you would be able to keep everything in check. And whenever you come across any issues, you know how to address this. As a result, it does not affect your efficiency, and the overall operation is carried out smoothly.
Like diamond blades, diamond core drill bits are prone to specific issues such as excessive wear and tear, lost or cracked segments, etc. So, it becomes crucial for you to check the bond your diamond core bit utilises.
Turning to a softer bond is a good idea if your bit has missing or broken components, especially for rigid materials. Again, if you find undue wear on the bit segments, you can switch to a wet drilling method involving the utilisation of coolant.
The coolant that is used in this case helps in the lubrication of the drill. However, you can check on the water lines if your bit has excessive wear during the wet drilling procedure. Other than that, it would help if you also tried increasing the coolant levels.
Mistake No.5# Not Employing The Appropriate PPE
While operating any powerful or heavy-duty tool, you should necessarily wear the proper PPE or personal protective equipment. If you fail to wear appropriate protective gear, it could considerably increase the risk of injuries.
So, to be on the safe side, you should take this step. Some drilling procedures, such as masonry, can expose you to heavy debris and dust. So, it becomes mandatory for you to wear protective goggles or glasses. Also, putting on a respirator or dust mask is equally important.
Specific working conditions and certain equipment pieces can even generate loud sounds, so you may require using professional-grade earplugs to protect your ears. Finally, you may also need to invest in additional gear like protective gloves or clothes based on your drilling job.
Final Note!
Mentioned above are some of the most common diamond drilling mistakes you should avoid if you wish to achieve the best outcomes. We hope we have cleared all your doubts and queries through this detailed guide. Have we missed anything, or do you have something to add? If yes, feel free to comment with your thoughts below.
Contact a reputed diamond drilling London company like CA Drillers for more queries. They have years of experience in this field and can guide you in the best possible manner. Consider paving a visit to their website today to learn more.
