1880 S Dairy Ashford Rd, Suite 650, Houston, TX 77077

Makita Orbital Sanders: What to know when using Sander

When you purchase a new power tool, it can be tempting to go all out and try every trick in the book to get the most out of it. This is especially true when it comes to your makita orbital sander. With so many different models and attachments available, it can be difficult knowing how to take full advantage of what’s on offer. Fortunately, we’ve done the research for you so you don’t have to fumble around trying different things and ending up with an underutilised sander. Keep reading to learn more about how you can get the most out of your new makita orbital sander – from using it as frequently as possible, through caring for it properly, and even extending its lifespan beyond what seems reasonable.

Use your Makita Orbital Sander Frequently

As with any power tool, the best way to maximise your makita orbital sander’s lifespan is to use it frequently. Not only will you make sure it gets used enough to last a long time, but you’ll also be able to pick up some very important wear and tear. To get the most out of your sander, you need to push the tool to its limits. This means getting underneath furniture, working through tougher materials like wood, and tackling tough jobs like sanding down a car’s paintwork. While you can use the sander whenever you feel like it, the more often you use the sander, the more frequently the tool will be pushed to its limits. The more often it’s pushed to its limits, the less likely it is to wear out. If you want to maximise the lifespan of your sander, use it frequently.

Take care of your Makita Orbital Sander

Taking care of a power tool is one of the most crucial things you can do to increase its longevity. Your Makita orbital sander will probably become one of your most-used tools as soon as you have it. To prevent any unneeded harm, it’s crucial to use the sander carefully right away. Make sure to cut off the power to the electrical outlets where the sander is connected before using it. If you have other power tools hooked into the same circuit as the sander, this is extremely crucial. You run the risk of starting a fire or getting electrocuted if you don’t. Make sure the sander and its wire are out of the way as you work as well. Make sure they are not in the way if you need to work between the sander and other instruments.

Make Sure keep away sander from dust

Dust and debris are a problem with power tools. Since they are drawn to the tools, they might damage the sander’s interior components. When using the sander in your workshop, keep dust and other debris away from it. Keep the sander away from the particles and dust that collect in your workspace. If you need to operate between them, be sure no other equipment are blocking your path or sitting on top of the sander. When not in use, store your Makita orbital sander away to keep the dirt, filth, and debris from building up on the actual sander.

Using lubricant will help it last longer

When it comes to extending the life of your Makita orbital sander, lubrication is an important factor to take into account. The tool is so heavily used that it doesn’t need much lubrication to run smoothly. However, if you find it begins to run more roughly, try adding a few drops of oil to the gearbox. This will give the sander a fighting chance against friction and wear and tear. The gearbox on your makita orbital sander should be lubricated every time you use the tool. If you notice it starting to get a little rough, add a few drops of oil to the gearbox.

Care and calibration

Like all power tools, care and calibration are crucial for extending the lifespan of your Makita orbital sander. Care is about making sure you keep the tool clean and lubricated. The goal of calibration is to use your sander as correctly as possible. These two can be a little challenging when using power tools. Most people should be able to get away with occasional calibrating if they clean and oil their sanders as they should. The simplest thing to do is the calibration if you notice that your sander is constantly wrong by a few tenths of an inch. To get your sander to read marks as accurately as possible, it only takes a few basic steps, like utilising a ruler and setting the dial. When utilising a sander with a lengthy stroke, calibration is very crucial. When a sander has a long stroke, it is much simpler to convince it to read anything erroneously.

Final Words

When looking for the best Makita orbital sander for your house, there are many different models to choose from. Before choosing to purchase a sander, keep these tips in mind to get the most usage out of it.