Water heaters are essential for providing hot water to your household. Unfortunately, like all machines, water heaters can experience common problems that can disrupt the flow of hot water, calling for a quick look by the plumbers in Geelong. Knowing the signs of common water heater issues and taking prompt action is key to preventing more significant and costly problems. Therefore we bring some of the usual water heater problems and their quick fixes for your rescue. Read on-
No Hot Water
If you’re not getting any hot water from your water heater, there could be a few possible causes. The first step is to check your thermostat settings and ensure it is set correctly. If it’s set in the right order, but you still don’t have hot water, there might be an issue with your pilot light or electric heating element. In this case, it’s best to call a professional plumbing company in Laverton for help to avoid making any mistakes with potentially dangerous components inside the unit.
Hot Water Not Hot Enough
Suppose your water heater is working yet you do not receive adequate temperature of hot water. In that case, it could be due to various causes, including sediment buildup in the tank, faulty gas valves or electric elements, or even improper thermostat settings. A simple solution may be as easy as flushing the tank with vinegar and baking soda to clear away sediment buildup. However, if that doesn’t work or you suspect an issue with one of the other components mentioned above, contact Laverton’s expert plumber for assistance in diagnosing and solving the problem.
Water Is Too Hot
If you are getting extremely hot water from your water heater, it’s probably because of a high thermostat setting, but it’s a simple issue to fix. You should be good to go if you lower the thermostat.
If that doesn’t work, look at the temperature pressure valve. If it’s broken, the heater won’t turn off when the temperature is right. In such a situation, you must replace the valve immediately because it’s a hazardous scenario.
Leak in the Tank
Leaking tanks usually result from corrosion on either the interior or exterior of the tank itself or faulty plumbing connections around it. If you notice wet spots near your unit, it’s time to give a quick call to a professional plumber for a hot water repair in Geelong because attempting to fix yourself can do more harm than good. A plumber will be able to inspect and repair both visible leaks as well as hidden ones that could be causing further damage behind walls and floors over time if left unchecked.
Noise in the Water Heater
There are several causes of water heater noises. The most frequent explanation is that as the water heats, a buildup of scale on the heating elements and in the tank causes rumbling, popping, and banging noises.
Try draining the tank and descaling if this is the case. Every few months, you should thoroughly flush the tank to avoid this issue in the first place. You should replace the tank if the issue worsens entirely.
Water heaters and pipelines can generate noise due to normal thermal expansion and contraction. Although this is innocuous, there isn’t much you can do to stop the noise.
Low Water Pressure
Lack of enough pipe width is a common cause of low water pressure. Most older homes have 12″ pipes, but most newer ones use 34″. The issue may not be with the boiler if you have low water pressure in an older home. Instead, consider installing wider pipes to fix the problem.
Dirty & Smelly Water
If the colour of your water begins to resemble dirty rust, corrosion inside your tank is the reason. You will need to replace the tank to solve this problem.
Before rebuilding the tank, flush the tank and replace the anode rod to see whether this resolves the issue. Bacteria in your heater may be at blame if your water smells foul. It is particularly typical if your water comes from a well. You might try flushing your tank or heating the water to its highest degree to eliminate all the bacteria. You can also try cleaning it with chlorine bleach if this doesn’t work.
Issue With the Pilot Light
There are multiple reasons why your pilot light may malfunction. If it doesn’t light at all, the pilot light aperture or tube may be blocked or need replacement. The thermocouple could also be damaged or loose, which is another possibility. You can have air in the gas line or a broken gas valve.
Summing Up
Water heaters are essential for providing hot water for our homes. Still, they can sometimes experience common problems that can lead to disruptions in service or, even worse, significant damage from unnoticed leaks over time. Knowing what symptoms indicate certain issues can save homeowners time and money for repairs because promptly addressing them will mean less expensive repairs. Keeping up on regular maintenance, such as flushing out sediment buildup periodically, can also help prevent many common problems before they arise altogether! Getting familiar with these common issues will go a long way towards helping any homeowner stay ahead of potential repairs before they become major headaches down the line!
If seeking hot water or a emergency plumber in Geelong, contact Your Local Plumbing. They are a bunch of well-experienced, licensed and insured professionals who can provide quick solutions to your plumbing needs at affordable pricing.